Nightly builds (NEW)

Development Development & Testing
641

Thanks for your help.

I installed the new imagem, but same problem:

root@x96max's password:
##############################################
#                  CoreELEC                  #
#            https://coreelec.org            #
##############################################

CoreELEC (official): nightly_20200203 (Amlogic-ng.arm)
X96Max:~ # cd .update/
X96Max:~/.update # wget https://relkai.coreelec.org/CoreELEC-Amlogic-ng.arm-9.2-
nightly_20200213.tar
Connecting to relkai.coreelec.org (116.203.16.118:443)
saving to 'CoreELEC-Amlogic-ng.arm-9.2-nightly_20200213.tar'
CoreELEC-Amlogic-ng. 100% |********************************|  204M  0:00:00 ETA*
'CoreELEC-Amlogic-ng.arm-9.2-nightly_20200213.tar' saved
X96Max:~/.update # md5sum CoreELEC-Amlogic-ng.arm-9.2-nightly_20200213.tar
07096f2b4c9b2a92a75be1368db161b7  CoreELEC-Amlogic-ng.arm-9.2-nightly_20200213.tar
X96Max:~/.update # reboot

After the installation:

root@x96max's password:
##############################################
#                  CoreELEC                  #
#            https://coreelec.org            #
##############################################

CoreELEC (official): nightly_20200203 (Amlogic-ng.arm)
X96Max:~ # cat /storage/init-previous.log
UPDATE IN PROGRESS

Please do not reboot or turn off your CoreELEC device!

Found new .tar archive
Extracting contents of archive... done
Checking KERNEL.md5... OK
Checking SYSTEM.md5... OK
Checking size: OK
Updating Kernel... 100%
Updating System... 100%

Updating Boot Files...
Updating device tree from /update/usr/share/bootloader/device_trees/sm1_s905x3_2g.dtb...
Updating device_trees folder...
Updating aml_autoscript...
Updating cfgload...
remote-toggle: disabling /meson-ir/ in device tree...
remote-toggle: enabling /meson-remote/ in device tree...
Boot Files Updated.

Cleaning up... done

There is no error in the file, but is doesn’t update.

Kind regards.

642

with the current nightly “20200213” sdr to hdr without function (see my contribution above)

643

jlazkano: How do you boot? From SD card or USB stick? If have both can you have connected only one media?

1 Like
644

Nobody else here with an x96 Max plus experiencing this?

645

me too… :unamused:
no HDR2SDR function with 20200212 on my N2.
no effect/change if set to AUTO or ON or OFF.

1 Like
646

X96Air P3

Bluetooth regression.
Although the BT adapter is recognised and connecting functions displayed for Devices, none of the three headsets I tried would hold a connection.

I reverted to yesterday’s .tar and BT is working as expected.

647

This option wasn’t available in my config.ini, while I’m on the latest nightly.
There was only hdmi_cec, and I’ve set this to 0, and added cec_func_config=0 as well.
Now, the box is not waking up anymore, which is good. Is there a way to have the TV turned of when I turn off the box? So, sort of one way communication? The TV can’t wake up/power down the box, but the box van wake up/power down the TV?
I’ve enabled the CEC adapter again in the CoreElec settings, but the TV is not powered off when I suspend/power off the box.
Thanks!

648

GT King Pro does not receive IP from time to time. The IP it receives is as follows 169.254.26.229 - 169.254.87.194. Tvheadent is disabled and the channel cannot be changed.The same problems occur with Pvr IpTv Client.CoreELEC does not work in the settings menu.
My device is used with this usb tuner TBS5520SE.

649

Are there plans to address the AAC multi-channel issue. Works fine in stable but still no dice in nightlies.

650

Hi, since I installed nightly_20200213 sometimes this message appears when CoreELEC starts. I have not seen this message before.
I use odroid N2 and I have never enabled the bl301 tool.

image
image4032×1197 1020 KB

systemctl status update-bl301.service:

update-bl301.service - CoreELEC BL301 Update Service
Loaded: loaded (/usr/lib/systemd/system/update-bl301.service; disabled; vendor preset: disabled)
Active: failed (Result: exit-code) since Fri 2020-02-14 22:13:50 CET; 18min ago
Process: 3375 ExecStart=/usr/lib/coreelec/update-bl301 -v (code=exited, status=1/FAILURE)
Main PID: 3375 (code=exited, status=1/FAILURE)

Feb 14 22:13:50 CoreELEC systemd[1]: Starting CoreELEC BL301 Update Service...
Feb 14 22:13:50 CoreELEC update-bl301[3375]: CoreELEC BL301 not installed
Feb 14 22:13:50 CoreELEC systemd[1]: update-bl301.service: Main process exited, code=exited, status=1/FAILURE
Feb 14 22:13:50 CoreELEC systemd[1]: update-bl301.service: Failed with result 'exit-code'.
Feb 14 22:13:50 CoreELEC systemd[1]: Failed to start CoreELEC BL301 Update Service.
651

I also noticed that something is wrong with the suspend mode. Sometimes when the suspend mode is activated, the red led is still on and I can’t restore kodi from sleep.

652

Vim3L Just updated to 13th February
Fixed my issues with the one MUX in all HD channels.
Now correct PC1 and no jitter / micro stutters.
Perfect Playback.

1 Like
653

For ondemand governor I used this
#!/bin/sh
(
echo ‘ondemand’ > /sys/devices/system/cpu/cpufreq/policy0/scaling_governor
) &

in autostart.sh. it works fine, but I don’t know if it’s the right way.
Is there any setting in the coreelec menu to switch between performance and ondemand governor?
thanks.

654

It is on the way so just wait few more days :slight_smile:

655

awesome!
What nice surprises are you preparing for us?

656

Precisely what you asked for…

657

I am just wondering whether the experts have the scaling problem “sdr to hdr” on the screen or whether I should continue to report this? greetings and a nice weekend

658

I never have seen this on screen. I changed the service script a bit and it should not happen again. Thx for the info!

1 Like
659

@vpeter: I have installed in internal.

Kind regards.

660

SDR to HDR not functional on 2/15 nightly.